Eddha Fe 6% ortho-ortho 4.8
used as an effective solution to correcting iron deficiencies and for the maintenance of iron levels in crops grown in highly acidic or alkaline soils. EDDHA Fe 6 is particularly effective in highly alkaline soil conditions. EDDHA Fe 6 is use in all crops that respond to supplemental applications of iron and good compatibility with all agricultural inputs such as fertilizers and pesticides.
| CAS RN.: |
16455-61-1 |
| EINECS: |
240-505-5 |
| H.S.CODE: |
2921.2190.00 |
The advantages of EDDHA-Fe 6
(1)Proven field results show greater yields and larger, healthier plants.
(2)Lowest cost per pound of available ortho / ortho iron.
(3)No messy mixing of dry powders, choice of liquid or dry.
(4)New concentrated suspension simplifies application; improves uniformity.
1. Chemical Analysis
| Component |
Range |
Typical |
| Appearance |
Red Brown Powder |
Red Brown Powder |
| Ortho:Ortho |
4.8 |
4.8 |
| Cheated Percentage |
98-99% |
Full Cheated |
| Fe |
6%±0.4 |
6.22% |
| PH |
7-9 |
7.17 |
| solubility(20°C) |
60g/L |
60g/L |
2. Application
| Fertilizer |
EDDHA Fe 6 is a micro iron chelate and is developed for correction and prevention of iron deficiency in agricultural and horticultural crops, particularly in alkaline and calcareous soils. |
3.Transportation Information
| DOT Classification: |
Not a DOT controlled material. |
| U.N. |
Not applicable. |
| Packing Group: |
Not applicable. |
4. Storage & Handing
Store in a cool, ventilated warehouse.
Keep away from fire and heat sources.
Oxidants should be stored separately and avoid mixing reservoir.
Equipped with the appropriate variety and quantity of fire equipment.
Storage areas should be equipped with appropriate materials asylum leakage.
5. Packing
(1)In 25kg pp bags;
(2)Packing with pallets
(3)16MT/20'FCL
6. Application Recommendations
(1)Fe Eddha 6% works best when crops are not under moisture stress and are supplied with adequate major nutrients.
Fe Eddha 6% is most effective when applied at crop stages where demand for iron is most critical and when the crop is most responsive to iron applications.
(2)If this product is to be applied as a liquid either on the soil or on the foliage, it is NOT necessary to pre-mix with a small amount of water. Instead, add this product directly into the solution tank slowly and maintain good agitation. Agitation and stirring should continue until the product is fully dissolved.
(3)As a matter of precaution, for tank-mix applications with other agricultural inputs such as fertilizers and pesticides, it is advisable to prepare a sample mixture of these products to ensure good compatibility before application.
(4)Fe Eddha 6% can be applied around the plants as a powder, liquid spray, and liquid injection or through drip irrigation systems
a.
When applied as a powder, it should be washed in or irrigated with water within 4 hours of application.
b. When applied as a spray onto the soil, make sure that coarse spray nozzles are used and that adequate volume of water is used to wet the soil thoroughly.
c.When applied as a soil injection, it should be done at less than 1 meter apart.
(5)General Rates of Application The rates recommended below represent the upper and lower limits of the range. Actual rate to be applied depends on size of the plant and the level of need as determined by the level of deficiency of iron.
| Crops |
Application Rates |
| Apples and stone fruits |
28g-140g per tree |
| Citrus, Avocados, Mangoes |
Young tree 500g-700g per 100m2 Mature tree 200g-500g per tree Annual maintenance 100g-150g per tree |
| Berries |
3.7g-7.5g per meter of row in a band or as a side dressing |
| Tomatoes, Cotton, Legumes, other vegetables and root crops |
1kg-2kg per hectare as maintenance or 2kg-5kg per hectare if chlorotic. Apply prior to planting or when deficiency symptoms appear. |
| Ornamental Shrubs |
20g-50g per bush |
| Ornamental plants |
60g per 10m2 |
( 6 )Applications on tree cropsThis product is to be applied in a wide circular band under the full canopy of the tree,regardless of the method of application.
Company Profile
Welcome to ChoiceChem
Choice Chemicals Ltd. is a specialty chemicals company in the business of producing and marketing Sulfates, Nitrates, Additives and Pesticide with more than 20 years OEM production experience in China. We help improve quality of life for the world's population by supplying superior quality & environment friendly chemicals to satisfy the global demand for agriculture and industry. ChoiceChem's mission is to be the supplier of choice to its customers, to produce meaningful benefits for consumers, our market partner and our employees, create brighter lives for people today and generations to come.
We mainly supply "ChoiceChem" brand Sodium metabisulphite, with an annual production capacity of 250,000 tons; as well as sodium bisulfite, sodium sulphite, sodium bicarbonate and magnesium sulphate, with production capacities of 40,000 tons each per year. In addition, the range of products is always expending according to customers' needs.
ChoiceChem's large-scale production bring cost advantage, our price is lower 2% compared with market price usually, it also can make sure most common package cargo can be delivered within 14 days. All ChoiceChem products were ISO/SGS approved, with 0 quality complain in past 3 years; and each sales has worked in ChoiceChem for more than 5 years on average in our multilingual customer service team.
Audited Supplier 
Welcome to ChoiceChem
){kind=link}