Price Chemical Formula Monoammonium Phosphate Fertilizer Map 12-61-0

• Customization: Available
• CAS No.: 7722-76-1
• Formula: 115.0257
• Model NO.: 7722-76-1
• EINECS: 231-764-5
• Certification: ISO
• Purity: ≥99%
• Type: Monoammonium Phosphate
• Grade Standard: Industrial Grade
• Water Solubility: 368 G/L (20 C)
• Melting Point(20 C): 190c
• Molecular Weight: 115.0257
• Transport Package: 25kg PP Bags
• Specification: 99%min.
• Trademark: ChoiceChem
• Origin: China
• HS Code: 3105400000
• Production Capacity: 2000000mt/Year

Product Description

Mono-Ammonium Phosphate 12-61-0









Application Recommendations

ChoiceChem MAP is recommended for use at the beginning of the growing season, because phosphorus availability is crucial for the establishment of root system at this stage, also it can serve as a high quality source of phosphorus also during other stages of the growth cycle.
Because of unique product characteristics,ChoiceChem MAP can be applied through any irrigation system and on any growing medium. ChoiceChem MAP is moderately acidic. Therefore, it is not corrosive to fertilizer pumps or to irrigation equipment.
(1). Compatibility
MAP is compatible with most water-soluble fertilizers, except for fertilizers containing calcium (Ca⁺⁺) or magnesium (Mg⁺⁺). To apply MAP in combination with calcium or magnesium fertilizers, use two fertilizer tanks. If only a single fertilizer tank is available, apply those fertilizers at different times.
(2). Quantitative Nutrigation
Each kilogram of MAP in the tank provides 610 grams of phosphorus (P₂O₅) and 120 grams of ammonium-nitrogen (N-NH₄). Example: from initial establishment to flowering, open-field grown tomatoes require phosphorus at a rate of 1.5 kg P₂O₅ per hectare per day. To provide this, apply MAP at a rate of 2.5 kg per hectare per day. This will provide also 0.3 kg nitrogen per hectare per day. To complete nitrogen and potassium requirements, apply AN and K .
(3). Proportional Nutrigation
The phosphorus concentration in the irrigation water depends on the quantity of MAP in the tank mix, and on the injection ratio. Use the following table to calculate the quantity of MAP and the injection ratio needed to reach a given concentration in the irrigation water.
 

MAP	Nutrient concentration (ppm, g/1000 litre)
(g/1000 liter water)	N	P2O5	P
100	12	61	27
110	15	79	34
135	17	90	40
180	22	112	50
225	44	225	100

(4). Foliar Feeding
Foliar spray with MAP is effective in supplying phosphorus whenever quick response to deficient plants is required. It should be considered a supplemental method to soil applied phosphorous. The concentration of MAP solutions can be increased according to leaf age.
On young leaves, spray concentration of 0.5% MAP is recommended in most crops. On mature leaves and more tolerant crops higher concentration (1.0% or more) may be applied.
MAP is compatible with most commonly used pesticides and fertilizers. However, it should not be mixed with calcium or magnesium fertilizers. It is advisable to confirm compatibility of your intended spray-mix by preparing a sample of the spray materials at their recommended concentrations in order to rule out the possibility of a detrimental cross reaction. This mixture should be sprayed onto small area prior to commercial treatment, in order to assess whether an adverse effect occurs.
Note: Above application recommendations are under general conditions, your consultation to local agronomists are strong recommended.

RFQ:

1.  How Do You Control Your Quality?
 
We maintain good quality control by following these procedures below:
 
(1) ChoiceChem Only Uses High-Purity Raw Material
 
(2) Strict Factory Inspection System
 
All our products are tested every 2 hours, and sub-standard products are allowed to leave the factory.
 
We also carry out third-party tests every 3 days to ensure that our in-house tests are properly calibrated and accurate. 
 
(3). Strict Package and Loading System
 
ChoiceChem only uses high-quality packages, and we always pack the cargo after it has cooled off totally to avoid expansion.
 
The cargo can be loaded directly in our factory, whole the loading process can be inspected by our in-house supervisors.
 
2.  What Is Your Delivery Time?
 
(1) Our delivery time is regularly updated according to the level of orders every day.
 
(2) Our current output is 300MT daily. This allows most cargo orders to be delivered within 7 to 10 days usually.
If it is China, where Entry-Exit Inspection and Quarantine (CIQ) inspection of cargo is needed, an extra 1 week will be required for applying and accepting CIQ inspection.
 
If you need an OEM package, colorful package, or need to engrave (for printing), we will need around 5 to 7 days for this.
 
Also, printing bags need around 1 to 3 days, and domestic transportation will require around 3 to 5 days, so an extra 2 weeks will be needed.
 
For the black color marks package and to engrave (for printing), we will need around 1 to 2 days for this. Printing bags need around 1 to 3 days, and domestic transportation for this will also require around 3 to 5 days, so an extra 7 to 10 days will be needed;
  
Would you kindly inform us about your purchase quantity and your expectation for receiving the cargo, please?
 
Do kindly contact our sales representative and we will check it for you immediately, please.
 
3. How Do You Make Sure That Delivery Is On Time?
 
(1) Our output is 300MT daily, which usually allows for most cargo orders to be delivered within 7 to 10 days.
 
(2) ChoiceChem's average rate of on-time deliveries has remained above 98.9% for the past 3 years. This level of consistency is what makes us unique and our reputation for being very dependable is solid.

(3) We also guarantee that if delivery is not made in time, we will provide compensation at the rate of 0.25% of the contract amount per week till it is delivered.
 
 4. Can You Do OEM Packages? 
 
Yes, we can do OEM packages per your request.
 
ChoiceChem also offers free package designing services. After you decide to work with us, our professional marketing team will help you to build your brand in your market.
 
 5. What's The MOQ For OEM Package?
 
The MOQ is usually 5000 pcs. of bags, but if there are only 1000 pcs. of bags available, we can also do it.
 
 
6.  Do You Have Stock?
 
1. We sell goods and, because we always get orders in line before we start production, we don't usually stock goods. All produce is to the customer's orders. 
 
2. Our goods storage period is less than 3 days, to maintain the freshness of the goods.
 
3. Our output is 300MT daily, which usually allows for most cargo orders to be delivered within 7 to 10 days. May I know when you need the cargo, please?
 
7. I Need To Get Registered Before Importing. Can You Help With The Registration?
 
Could you kindly tell us your full registration documents requirements, please?
 
I will check with our registration department for you and we will try our best to help you finish your registration soon.
 
Welcome to ChoiceChem. Kindly contact our sales representative for more information about our factory.